Contents
vii
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
NTP- A71 Create, Download, and Assign Alarm Severity Profiles 7-7
NTP- A168 Enable, Modify, or Disable Alarm Severity Filtering 7-8
NTP- A72 Suppress Alarms or Discontinue Alarm Suppression 7-8
NTP- A32 Provision External Alarms and Controls on the Alarm Interface Controller 7-9
NTP- A258 Provision External Alarms and Controls on the Alarm Interface Controller-International 7-11
CHAPTER
8 Monitor Performance 8-1
Before You Begin 8-1
NTP- A253 Change the PM Display 8-2
NTP- A122 Monitor Electrical Performance 8-3
NTP- A198 Monitor Ethernet Performance 8-5
NTP- A279 Create or Delete Ethernet RMON Thresholds 8-5
NTP- A250 Monitor OC-N Performance 8-6
NTP- A285 Monitor FC_MR-4 Performance 8-7
NTP- A289 Create or Delete FC_MR-4 RMON Thresholds 8-7
CHAPTER
9 Manage Circuits 9-1
Before You Begin 9-1
NTP- A199 Locate and View Circuits 9-2
NTP- A200 View Cross-Connect Card Resource Usage 9-2
NTP- A151 Modify and Delete Circuits 9-4
NTP- A278 Modify and Delete Overhead Circuits 9-4
NTP- A78 Create a Monitor Circuit 9-5
NTP- A79 Create a J1 Path Trace 9-6
NTP- A293 Create a J2 Path Trace 9-7
NTP- A298 Reconfigure Circuits 9-9
NTP- A301 Merge Circuits 9-10
CHAPTER
10 Change Node Settings 10-1
Before You Begin 10-1
NTP- A81 Change Node Management Information 10-2
NTP- A201 Change CTC Network Access 10-2
NTP- A202 Customize the CTC Network View 10-3
NTP- A203 Modify or Delete Card Protection Settings 10-4
NTP- A292 Modify or Delete Communications Channel Terminations and Provisionable Patchcords 10-4
NTP- A85 Change Node Timing 10-5
To Next Page
Loading...
Need help?
General
