Page 6-188
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Node IP Connection Groups
Day/Night Emergency Outgoing Access
4.127 There are separate lists for stations with emergency outgoing access in day and night
modes. By default, the automatic station list (Auto: All Stations) is assigned to Day/Night
Emergency Outgoing Access. To program the stations that will have emergency outgoing
access for the node trunk group, select
Emergency Outgoing Access and then Day Mode or
Night Mode and do the following:
4.128 To add extensions to the list:
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the device type(s) and then select Next. A list appears. (You can view them in a
list by selecting the List button or view details by selecting the Details button.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
4.
Highlight the appropriate items and then select Add Items. When you have added all
the desired devices select
Finish. Your selections appear in the list.
NOTE: If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
4.129 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
Remove Selected Items.
Day/Night Outgoing Access
4.130 There are separate lists for stations with outgoing access in day and night modes. By
default, the automatic station list (Auto: All Stations) is assigned to Day/Night Outgoing
Access. To program the stations that will have outgoing access for the node trunk group, select
Outgoing Access and then Day Mode or Night Mode and do the following:
4.131 To add extensions to the list:
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the device type(s) and then select Next. A list appears. (You can view them in a
list by selecting the List button or view details by selecting the Details button.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
NOTICE
It shall be the responsibility of the entity or person(s) completing installation and mainte-
nance of hardware or software described herein to research, comply with and be responsi-
ble for the specific governmental rules and regulations regarding Emergency Outgoing
Access 911 [999 in Europe] of the geographic location in which such functions are per-
formed.
To Next Page
Loading...
