Page 6-99
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
System Folder
PROGRAMMING
6
C. SYSTEM FOLDER
17.13 If you open the System folder (the shortcut is “AXX”), you will see the following direc-
tories. Opening each of those directories reveals their programming fields. The shortcuts for
each of the programming areas are shown in parentheses in the chart below. See page 6-51 for
information about using the Shortcut option.
Table 6-18: System Directory
Folder Ref. Programming Field
Cabinets (CNFG, CONF, SETU) 6-110 Error Thresholds (T1ERR)
Reference Clock List (T1REF)
Resources
Sockets
Circuit Cards
Devices and Feature Codes
(DEV)
6-156 Extension Lists (EXTL or LIST)
Feature Codes (FEAT)
Hunt Groups (HUNT or UCD)
IP Ports (IPP)
IP Connections (IPC)
Modems (MDM)
Network Groups (NETG)
Node IP Connection Groups (NIPCG)
Nodes (NRG or NODE)
Page Ports (PPORT)
Page Zones (PAGE)
Stations (STN)
System Serial Ports (PORT, SPA, or SPP)
CO Trunk Groups (TRNK)
Node Trunk Groups (NTG)
Trunks (ILIN or INDT)
Flags (MISC or SYS) 6-258 System-Wide Flags
Hunt Group-Related Information
(HRI)
6-263 ACD Agent IDs (AGID)
IP-Related Information 6-265 Call Configurations
Maintenance (MAIN) 6-268 Call Cost (COST)
Freeze Zones (FRZ)
Message Print (MPP or MPRNT)
SMDR (SMDR)
Major Reset Scheduling (MRS)
To Next Page
Loading...
