Inter-Tel AXXESS - Figure 5-8 Standard Keymap (V6.X)

To Next Page

To Previous Page

Page 5-137

System Features

INTER-TEL

AXXESS

MANUAL VERSION 11.0 – May 2008

Standard Keymap (v6.x)

FEATURES

Figure 5-8. Standard Keymap (v6.x)

Standard/Alternate Keymap Switching

12.55 In DB Programming, each phone is assigned a standard keymap and can also have an

alternate keymap. The user can switch between the keymaps by entering a feature code. (The

maps can also be switched in the database using the Alternate Keymap station flag; see page 6-

209 in PROGRAMMING.)

12.56 Having two keymaps provides the user with access to more features or trunks. In most

situations, the user would have one button programmed with the Switch Keymap feature code

(399) in each keymap so that it would be easy to change the keymap. (If the user-programmed

button has a lamp, the lamp is lit when the alternate keymap is active.)

12.57 When keymaps are switched, any user-programmable buttons in the maps retain their

user-programmed values; they are not returned to default during the switch. However, if the

keymaps do not have the same user-programmable buttons in the same positions, the location

of individual buttons may change when the keymaps change.

12.58 If a user switches keymaps during an outside call, the call will appear on the appropri-

ate trunk or CALL button for that keymap. The button assignment may not be the same for

both keymaps. For example, it could appear under a CALL button on one map and an individ-

ual trunk button on the other.

12.59 If a button is not available in the currently active keymap when a call rings in, the user

will still see the correct display, hear ringing, and can answer as usual.

12.60 To switch between keymaps when the station is idle:

While on hook, enter the Switch Keymap feature code (399). The display shows STAN-

DARD KEYMAP IS ACTIVE or ALTERNATE KEYMAP IS ACTIVE.

12.61 To switch between keymaps during a call:

While on a call, press or

and enter the Switch Keymap feature code

(399). The display momentarily shows STANDARD KEYMAP IS ACTIVE or

ALTERNATE KEYMAP IS ACTIVE.

xxx

∞

SPCL

Other manuals for Inter-Tel AXXESS