Inter-Tel AXXESS - Voice Processor System-Wide Information; Dial-0 Destinations

Page 6-344
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Voice Processor System-Wide Information
2. VOICE PROCESSOR SYSTEM-WIDE INFORMATION
2.1 A program planning sheet that lists the Voice Processor system-wide information is
included on the system software CD-ROM.
2.2 The following system-wide parameters are described in this section:
• Dial-0 Destinations (see page 6-344)
• Disk Usage Statistics (see page 6-345)
• System Administrator Mailbox (see page 6-345)
• VPIM Postmaster (see page 6-345)
• VPIM Home Domain (see page 6-346)
• Alternate Tone Detection (see page 6-346)
• Volume (see page 6-346)
• Save Message on Return Call (see page 6-346)
• Swap “7 For Save” and “9 For Delete” Message Keys (see page 6-347)
• Identification Prompt (see page 6-347)
• Enterprise Messaging System Fields (see page 6-348)
— Automatic Speech Recognition (ASR) Setting
— Automatic Speech Recognition (ASR) Enabled
• Monitor Password (see page 6-350)
• Windows Network Login (see page 6-351)
A. DIAL-0 DESTINATIONS
2.3 These fields are used for programming the dial-0 operator destination for the Voice
Mail and Automated Attendant applications (where calls are sent if the caller presses 0).
2.4 Day and Night Dial-0 Destination Type: These drop-down list boxes are used for
selecting the type of device that will be used for the day and night operator destinations. Select
the desired drop-down list box and scroll to the desired type (Extension, Mailbox, or None).
Then press
ENTER or click on another field to save the change.
• If
Mailbox is selected, the system will automatically transfer the caller to a the mailbox,
specified in the Dial-0 Destination below, when 0 is pressed.
• If
None is selected, operator access will be denied from Voice Mail and Auto Attendant
applications.
• If
Extension is selected, any station, application (including a STAR application), or
hunt group extension number can be selected.
NOTE: Version 7.0 and later system software supports STAR applications as a valid
Dial-0 Destination.