Page 6-313
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Key Assignments
PROGRAMMING
6
Method A
1.) Select the current Value and enter the new value in the text box.
2.) Press ENTER. A screen appears showing you what is associated with the
number you entered.
3.) Select OK. The new number appears in the field.
Method B
1.) Select Change Selection. A window appears that asks you to select the type
to include.
2.) Select the type (feature code, station, etc.) and then select Next. A list
appears. (You can view them in a list by selecting the List button or view
details by selecting the Details button.)
3.) Highlight the appropriate item and then select Finish. Your selection appears
in the Selection field.
— Ring When: This field allows the station to receive a burst of ringing when a cer-
tain number of calls are present at a primary station, and at least one call is ringing
or camped on. The ring burst will repeat periodically as long as the programmed
number of calls are present at a primary station. (This period is determined by the
DKTS Secondary Extension Key Alerting Tone timer.) If this field is set to 0, the
secondary station will never receive the burst of ringing. To set this number, select
the current Value and scroll to or enter the new value in the box. Then press
ENTER or select another field to save the change.
10.33 The default values for the programmable buttons are shown in the chart below.
Table 6-36: Default Programmable Buttons
BTN # Key Type Code Feature
01 Feature Key 372 Do-Not-Disturb
02-06 Undefined None None
07 Feature Key 5 Conference
08 Feature Key 336 Individual Hold
09 Feature Key 345 Transfer To Ring
10 Feature Key 381 System Speed Dial
11 Feature Key 380 Redial
12 Feature Key 7 Page
13 Feature Key 6 Queue Request
14-16 Undefined None None
17 Feature Key 313 Background Music
18 Undefined None None
19 Page Zone 9601 Zone 1
20 Feature Key 382 Station Speed Dial
21-35 Undefined None None
To Next Page
Loading...
