Inter-Tel AXXESS - Default Station

Page 5-266
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Default Station
If the station is not permitted to forward to the destination entered, you will hear
reorder tones and can try again.
If you hang up before entering a forward destination, the programmed forward is
canceled.
6. To turn off Call Forward: Enter 355 and then hang up instead of entering a destina-
tion. You hear a confirmation tone.
48. DEFAULT STATION
48.1 A station user can enter one feature code that will return the following features to their
default states. Returning to default:
• Cancels the following features, if in effect:
— Do-Not-Disturb
— Manual Call Forwarding
— Queue Request
— Account Code For All Calls Following
— Background Music
— Ring Intercom Always
— Headset Mode
• Restores the following features, if disabled:
— Handsfree
— Page Receive
— Hunt Group Replace
— System Forwarding
• Returns phone volumes to default levels
• Returns phone to standard keymap
• If the phone is a member of one or more ACD hunt groups, logs into the hunt group(s)
• Does not affect PCDPM bit rate
48.2 This feature is especially useful for installers and troubleshooters who need to know
exactly how a given station is programmed.
48.3 To return the station to default:
Phone: While on or off hook, enter the Default Station feature code (394). You hear a
confirmation tone and the display shows STATION DEFAULTED. If off hook, hang up.
Single-Line Set: Lift the handset and enter the Default Station feature code (394). You
hear a confirmation tone followed by dial tone. Hang up.