Page 5-324
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Diagnostics Monitor Support
E. DIAGNOSTICS MONITOR SUPPORT
54.36 The latest version of Diagnostics Monitor includes support for the v9.0 and later diag-
nostics features.
54.37 Dump Extension: SIP trunks is included in the Dump Extension option (System Moni-
tor\Dump Extension).
54.38 Dump Resource Managers: The following dump resource managers commands (Sys-
tem Monitor\Dump Resource Managers) allow you to quickly view information without hav-
ing to log in by DB Studio. The v9.0 and later commands consist of the following:
• Call Configuration: Displays the IP call configuration values in the system.
• Call Diagnostics: Displays a snapshot of the active calls in the system.
• Caller ID Resources: Displays the number of caller ID receivers and transmitters allo-
cated on the system.
• IP Port Device Manager: Displays the list of unavailable IP port devices, IPRCs that
are off-line (programmed, but not plugged in), available IP Port devices, IPRCs that are
on-line, and the number of networking sockets currently established with each IPRC.
• License Manager: Provides a list of SIP trunks that have a SIP trunk license.
• Network Groups: Displays all the IP networked groups in the system.
• Network Status Module: Displays the entire network status module. The Network Sta-
tus Module dump determines which nodes in the network are running at which versions
and which nodes do not have the “ENABLE 99 NODES” license loaded.
• Off-Node Device Container: Displays all of the off-node devices.
• Periodic Diagnostics Monitor: Displays information for the periodic diagnostics fea-
ture.
• Phantoms: Displays all the phantoms in the system.
• SIP Gateway: Displays all the SIP Gateways in the system.
• System Device Information: Displays the number of devices in the system.
54.39 Dump Logs: The following dump log commands (System Monitor\Dump Logs) sup-
port the v9.0 or later diagnostics enhancements:
• Network Diagnostics Log (previously named Network Print Log): Displays specific
network information.
• Software Performance Statistic Log: Displays system software performance statistics.
To Next Page
Loading...
