Inter-Tel AXXESS - Table

Page 5-139
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Secondary Extension Appearances
FEATURES
5
Secondary Extension Appearances
12.67 The Secondary Extension Appearances feature allows calls ringing or on individual
hold at one “primary” station to appear on a “secondary extension key” at another station. For
example, a secretary or assistant can have a secondary extension button for a supervisor’s sta-
tion, or one station can have several secondary extension buttons, each associated with a differ-
ent primary station. The primary station and the secondary station must reside on the same
node. (See page 6-221 for key programming information.)
12.68 A secondary extension button functions as follows:
• When a call is ringing or holding on any CALL button at the primary station, pressing
the secondary extension button will answer the call. (This includes recalls, transfers,
callbacks, and hunt group calls.)
• If the secondary extension button is unlit, pressing the button places an intercom call to
the primary station. If the button is flashing, an intercom call can still be placed without
answering the incoming call by pressing the pound [hash] (#) button before the second-
ary extension button, by pressing a DSS button, or by manually dialing the primary sta-
tion’s extension number.
12.69 There are two programmable options that determine the type of call indications the sta-
tion user will receive for calls on a secondary extension button:
PAGE
Programmable Button 12: Page (7)
QUEUE
Programmable Button 13: Queue Request (6)
MUSIC
Programmable Button 17: Background Music (313)
PAGE ZONE 1
Programmable Button 19: Selects Page Zone 1 for making a page.
STN SPEED DIAL
Programmable Button 20: Station Speed Dial (382)
FWD
Call Forward All Calls (355) Also used for canceling Call Forward.
SPECIAL
Signals the system to expect a feature code.
ANSWER
Answer (351)
OUTGOING
Selects a trunk for placing an outgoing call using the station's Outgo-
ing Call feature (8).
SPEAKER
Speakerphone On/Off
MSG
Message (365) – Also retrieves messages when the flashing MSG
button is pressed.
MUTE
Microphone Mute On/Off (314) (This is a fixed-function button on digi-
tal phones.)
DATA
Data (340)
STATION SPEED DIAL
BUTTONS 0-9
Used for storing and dialing one station speed-dial number each.
UNDEFINED
Analog phones and some Executone IDS and Wave Phones have
several undefined buttons that can be programmed as desired.
Table 5-28. Default Phone Feature Buttons (Continued)
Button Function