Inter-Tel AXXESS - Table 5-15 Caller ID Forwarding for Outbound Calls

Page 5-79
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Caller ID Forwarding
FEATURES
5
Caller ID Forwarding Scenarios
10.96 The following scenarios describe how incoming and outgoing calls are connected
through a PRI to another PBX using the Caller ID Forwarding feature.
10.97 Scenario #1: An extension or application places an outbound call
.
Table 5-15. Caller ID Forwarding for Outbound Calls
Type of Call When: Is Set to:
The System
Sends:
Outbound
External Call
Calling Party Number and/or Name No entry No Caller ID
information
Propagate Original Caller ID
--
1
1. This flag or entry has no affect on the situation because the other flags that are enabled have
priority, the call condition does not apply, or caller information is not provided.
Send STN Caller ID to Attached PBX No
Propagate Original Caller ID on Transfer
--
1
Calling Party Number and/or Name an outside
telephone
number and/or
name
Calling Party
Number and/or
Name
Propagate Original Caller ID
--
1
Send STN Caller ID to Attached PBX No
Propagate Original Caller ID on Transfer
--
1
Calling Party Number and/or Name No entry or an
outside tele-
phone number/
name
1
User name and
extension from
the calling
extension
Propagate Original Caller ID
--
1
Send STN Caller ID to Attached PBX Yes
Propagate Original Caller ID on Transfer
--
1