Page 6-270
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Freeze Zones
B. FREEZE ZONES
8.7 You can freeze the system to “lock” the current state of the system fault history queue,
which is a sequential list of all system commands and inputs. This list, when decoded, can be
used to determine a series of events which may have resulted in an error. Unfreezing the sys-
tem “unlocks” the current state of the history queue, and resumes event collection.
8.8 Using freeze zones, you can determine which nodes in the network are frozen during
each freeze request. There can be up to 10 freeze zones in the database.
8.9 To program a freeze zone, first select Freeze Zones to display the list. At this level you
can select the description field and enter a descriptive name for the zone in the text box. Then,
to program an individual zone, double-click on it. A list of the nodes in that freeze zone, if any,
appears. To add or delete nodes, do the following:
8.10 To add nodes to the freeze zone: Use one of the following methods:
Method A
1. Select the current Value and enter the new value in the text box.
2. Press ENTER. A screen appears showing you what is associated with the number you
entered.
3. Select OK. The new number appears in the field.
Method B
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the node type(s) and then select Next. A list of nodes appears. (You can view
them in a list by selecting the List button or view details by selecting the Details but-
ton.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
4.
Highlight the appropriate nodes and then select Add Items. When you have added all
the necessary nodes select
Finish. Your selections appear in the list.
NOTE: If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
8.11 To delete nodes from the freeze zone: To delete one or more node from the list, high-
light them and then right-click. Select
Remove Selected Items.
To Next Page
