EasyManua.ls Logo

Inter-Tel AXXESS - Table 5-14 Caller ID for Line Type

Inter-Tel AXXESS
1626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 5-77
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Caller ID Forwarding
FEATURES
5
Caller ID Forwarding
10.85 Caller ID forwarding allows Call Processing (CP) to send Caller ID information from
any incoming services to the public or private network using Primary Rate Interface (PRI) or
Basic Rate Interface (BRI) Integrated Services Digital Network (ISDN) circuits. In the Euro-
pean market Caller ID is known as Calling Line Identification [CLID]. When Caller ID is
enabled, the system includes information that identifies the caller to the public or private net-
work.
10.86 The Caller ID information can be an endpoint user name or extension, caller number
(calling party number or name), or incoming Caller ID information. The system software can
process any incoming caller ID information and then resend this information through an ISDN
circuit with some limitations. In other words, caller ID received through an ISDN, analog line,
or T1 circuit can be processed and sent out to an ISDN circuit. Caller ID information can also
be forwarded between nodes.
10.87 Caller ID information presented by the system results from any one of the following
events:
A call that is originated from an endpoint on the system.
A call that is redirected from an external call.
The system programmable fields in DB Programming under System\Devices and Fea-
ture Codes\CO Trunk groups\<trunk group>:
Send Station Caller ID to Attached PBX (see page 6-239)
Propagate Original Caller ID (see page 6-240)
Wait for ISDN Caller ID Information (see page 6-241)
10.88 The following fields have been added to DB Programming under System\Devices and
Feature Codes\Stations\<station> to support Caller ID Forwarding.
Calling Party Name (see page 6-207)
Propagate Original Caller ID on Transfer Flag (see page 6-212)
10.89 The Propagate Original Caller ID on Transfer flag (for voice mail) has been added in
Voice Processor\Devices\Applications\<Voice Mail application>. See page 6-369.
10.90 See page 7-36 for troubleshooting information.
Caller ID for Line Type
10.91 Based on the caller ID settings, the following calls are supported with the processing of
the Caller ID number or name.
Table 5-14. Caller ID for Line Type
Incoming Call Type Outgoing Call Type The System Sends:
PRI PRI Caller ID name and number
BRI Caller ID number only
1
BRI PRI Caller ID number only
1
BRI Caller ID number only
1
T1 Automatic Number
Identification (ANI)
PRI Caller ID number only
2
BRI Caller ID number only
1

Table of Contents

Other manuals for Inter-Tel AXXESS

Related product manuals