Page 6-352
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Windows Networking Password
2.35 If Voice Processing is unable to log on to the network, a message is automatically
entered into the Windows System Event Log. Because Voice Processing tries repeatedly to log
in to restore a network connection, if the network is down for a long time (or Voice Processing
is running in an environment without a network), many entries will be entered into the Event
Log. Eventually, the log fills up and warning messages start appearing on the PC screen. Use
the following procedure to change the setting of the Event Log.
1. Select Start - Programs - Administrative Tools (Common) - Event Viewer.
2. Choose Log Settings in the Log drop-down menu.
3. In the Event Log Settings screen, make sure that Event Log Wrapping is set to Over-
write Events as Needed
.
4. Select OK to save your change and exit.
To Next Page
Loading...
