Page A-15
Appendix A — Networking
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
IP Networking Programming Example
APPENDICES
8. Under System\Devices and Feature Codes\Node IP Connection Groups, enter a descrip-
tion and username for the each P8XXX extension. Use a description/username that
identifies where the off-node extensions reside. For example, if P8000 includes the off-
node IP connection extension for connecting to Node 2, use TO NODE 2 as the descrip-
tion/username for P8000.
9. Under System\Devices and Feature Codes\Nodes\97XXX\Node Trunk/IP Connection,
add the Node IP Connection Group extension (P8XXX) to the appropriate node (i.e.,
the remote node created in step 1).
10. Repeat steps 1-9 for all nodes that will be networked via the IPRC.
To Next Page
Loading...
