Page 5-29
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Attendant Recall
FEATURES
5
6.14 If there is not a primary attendant, recalls remain at the stations and ring until answered
or disconnected by the system.
6.15 To answer a hold or transfer recall at an attendant station: When you see a hold or
transfer recall display (XXXX RCL FROM YYYY) and hear a recall ringing, lift the handset.
Or, do one of the following:
• Outside call recall: Press the medium-flashing CALL button or individual trunk but-
ton. Or, press the button. (If more than one trunk is recalling, pressing the
button selects the outside call indicated on the display.)
• Intercom call recall: Press the button or the
ANSWER menu button. (If you are
busy when the intercom call recalls, it camps on. The button flashes at the
medium rate, but you do not hear recall ring signals.)
• Conference call recall: Press the flashing button to connect with the confer-
ence call. The button flashes slowly, and the display shows CONFERENCE IN
PROGRESS. If the parties are still talking, press the button again and hang up
to return the parties to their conversation. The button flutters. You can enter the
conference at any time by pressing the fluttering button. If the Hold timer
expires, the conference recalls your station again. If the parties have hung up, hang up
to disconnect the call.
To Next Page
Loading...
