Page 5-121
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Phantom Devices
FEATURES
5
11.5 Some OAI applications, such as Attendant Console, can send feature code requests to
devices. The following feature codes (U.S./Europe) are not available for phantoms:
11.6 Phantoms use up the same software resources as a regular endpoint or IP endpoint, with
the exception of the voice paths (phantoms do not have voice paths). Therefore, they can have
an impact on system performance. The default capacities for phantoms are shown in the fol-
lowing table.
11.7 Phantoms in v11.0 or later DB Programming are defaulted to the not-in-DND status.
When upgrading an old database to v11.0 or later, if there were phantom devices in the old
database, their DND statuses will not be changed after the conversion.
11.8 See the related topics:
• Programming (see page 6-196)
• Troubleshooting (see page 7-50)
• Answer (default fc 351) • Page (7)
• Auto Line Answer (350) • Page On/Off (325)
• Barge-In (386) • Ring Tone Selection (398)
• Change Language (301) • Queue Request (6)
• Conference (5) • Record-A-Call (385)
• Emergency Calls (911/999) • Redial (380)
• Group Listen On/Off (312) • Reverse Transfer (4)
• Handsfree On/Off (319) • Seize Device (9973/9173)
• Headset Off (316) • Steal (387)
• Headset On (315) • System Hold (335)
• Headset On/Off (317) • Transfer to Ring (346)
• Hookflash (330) • Transfer to Hold (346)
• Background Music On/Off (313)
Table 5-26. Phantom Devices Default Capacities
System Type
Maximum
Phantoms
CPC
64
CPS
256
To Next Page
Loading...
