Page 5-145
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Selectable Ring Tone
FEATURES
5
2. To save the setting on Executive Display, Standard Display, Basic Digital, Model
8560, Model 8520, and Model 8500 Phones: Press both edges of the Volume button at
the same time. Display phones show VOLUME SAVED.
To save the setting on Professional Display, Associate Display, and Eclipse Basic
Digital Phones: Press the center of the button. Display phones show VOLUME
SAVED.
If this step is not performed, the phone will return to the previous volume level when
the call or tone ends (except for the ringing alert tone or background music volume,
which is automatically saved at the most recent volume level).
12.92 To return a phone to default volume levels:
While on or off hook, enter the Default Station feature code (394). If off hook, hang up.
The display shows STATION DEFAULTED.
NOTE: Entering this feature code also cancels do-not-disturb, manual call forwarding,
background music, ring intercom always, all calls following account code, headset
mode, and queue requests; and restores handsfree mode, pages, hunt group calls, and
system forwarding.
G. SELECTABLE RING TONE
12.93 The tone of the phone ring signals (all tones except call waiting) can be changed by the
user to create distinctive ringing. If stations are placed close together, changing the tone makes
each station’s ring easier to recognize. On all phones, the tone is changed by entering a feature
code and a code, as described below.
12.94 There are ten ring tone options (0-9). Selection 0 will turn off the ring signals.
NOTE: Executone phones have only eight distinct ring tones. Settings 1 and 9 are actually the
same tone. However, you can still use setting 0 to disable ringing.
12.95 To change phone ring tone:
1. While on hook, enter the Program Ring Tone feature code (398). The display shows
SELECT RING TYPE (0-9) OR SCROLL.
2. Select the desired tone.
— To select a specific ring tone: Enter a number 1-9 for the desired ring tone. The
display shows RING TYPE X SELECTED.
— To scroll through the tones: Press the low end of the Volume button or the
PRE-
VIOUS
button to scroll backward through the tones. Press the high end of the Vol-
ume button or the
NEXT button to scroll forward. (You cannot scroll to selection 0,
you must enter it as described below.) The display shows RING TYPE X
SELECTED.
— To turn off ringing: Enter or press the
RINGER OFF menu button. The dis-
play shows RING TYPE OFF SELECTED.
3. Lift and replace the handset or press the pound (hash) button ( ), both ends of the Vol-
ume button, or the
ACCEPT button to exit. The selected tone will be heard when the
phone rings (unless ringing was disabled). The display shows RING TYPE X SAVED.
To Next Page
Loading...
