Page 5-155
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Using DSS/BLF Buttons (DSS/BLF Unit or Phone DSS/BLF)
FEATURES
5
2. If desired, wait for an answer and announce the call. If you are calling a device that
does not accept handsfree calls (such as an automated attendant), the display shows
HANG UP TO FINISH TRANSFER.
3. You have the following options:
To complete the transfer: Hang up or press another CALL button. The display shows
CALL TRANSFERRED TO (username).
To transfer the call to hold: Press the Hold button, or press or
and
enter the Individual Hold feature code (336). The call will not ring or send call waiting
signals until the Hold timer expires.
To try another station: Press another DSS/BLF button.
To return to the caller: Press the lit CALL button, trunk button, or button.
13.6 To reverse transfer (pick up) a call ringing or holding at another station:
EITHER, enter the Reverse Transfer feature code (4) and then press the DSS/BLF but-
ton of the station where the call is ringing.
OR, press the desired DSS/BLF button, and then press or
and enter the
Reverse Transfer feature code (4).
To Next Page
Loading...
