Inter-Tel AXXESS - Page 727

Page 5-201
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Enabling the Account Code for All Calls Following Feature
FEATURES
5
26.37 To enter an account code and use it for all following calls:
1. Phone: Enter the Account Code For All Calls Following feature code (391). Display
phones show ENTER ACCT CODE.
Single-Line Set: Lift the handset and enter the Account Code For All Calls Following
feature code (391).
2. Enter the account code using the keypad; phone users may press a speed-dial button to
enter an account code number that has been stored in that speed-dial number location. If
an account code is entered that has fewer than the programmed maximum number of
digits, press to terminate the code. Display phones show numbers. You hear a single
progress tone when the code is accepted.
26.38 To cancel the account code for all calls following feature:
1. Phone: Enter the Account Code For All Calls Following feature code (391). Display
phones show ENTER ACCT CODE.
Single-Line Set: Lift the handset and enter the Account Code For All Calls Following
feature code (391).
2. If on hook, lift and replace the handset or press to exit. If off hook, hang up.
#
#