Inter-Tel AXXESS - Page 732

Page 5-206
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Call Waiting
2. To return to the first call on hold:
If you want to end the current call, hang up. Return to the holding call by lifting the
handset and entering the Individual Hold feature code (336).
If you want to place the current call on hold and connect with the original call: Hook-
flash (press
RECALL) and then enter the Individual Hold feature code (336) twice.
28.6 To move a camped-on intercom call to do-not-disturb:
While on a call, you hear call waiting signals:
Phones with menu buttons: Press the
DO-NOT-DISTURB or IC CALL TO DND menu
button.
Other Phone: Press the DND button, or enter a Do-Not-Disturb feature code (370 or
372). The DND button lights. The intercom caller is no longer camped on and receives
do-not-disturb indications.
Single-Line Set: Hookflash (press
RECALL) and enter a Do-Not-Disturb feature code
(370 or 372). The intercom caller is no longer camped on and receives do-not-disturb
indications. hookflash (press
RECALL) twice to return to the current call.