Page 5-243
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Intercom, Speed-Dial, and Feature Code Directory
FEATURES
5
b. In alphanumeric mode ( button and/or Message Lamp lit): Press the key-
pad buttons to enter the desired characters. See the chart above. Press once
to advance or twice to leave a space. Press to backspace. Press or the
SEARCH menu button to begin the search. The closest match will be displayed.
Menu button phone users can return to the initial entry by pressing the
START
OVER
menu button.
4. If desired, press the high end of the Volume button or the NEXT button to scroll forward
alphabetically through the directory or press the low end of the Volume button or the
PREVIOUS button to scroll backward.
5. Do one of the following:
To store the selected number in a station speed-dial location: Press the desired
speed-dial button. You hear confirmation tone when the number is accepted.
To automatically dial a displayed extension number: Press , the button, or
the
ACCEPT button. (If an intercom call is camped on and the button is lit,
pressing the
IC button answers the waiting call and terminates the Directory feature.)
To dial a displayed outside number: Press , the
CALL menu button, or a CALL
button. The system automatically dials the number using your programmed outgoing
access code.
To dial a displayed feature code: Press or the
ACCEPT button. The system auto-
matically dials the feature code.
To search for another name or number: Repeat the procedure beginning at step 3.
To Next Page
Loading...
