Page 5-260
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Do-Not-Disturb
2. To select message 01 (DO-NOT-DISTURB):
Phone: Press the Speaker button, or lift and replace the handset. The but-
ton lights.
Single-Line Set: Hang up.
To select any of the 20 pre-programmed messages: Enter the desired number (01-20)
or press the
SCROLL menu button to begin scrolling. Display phone users may scroll
through the messages by pressing the high end of the Volume button or the
NEXT but-
ton to go forward or the low end of the Volume button or the
PREVIOUS button to go
backward (the display shows the selected message). If you enter an invalid message
number, you will hear reorder tones, and the display shows INVALID DND MESSAGE
NUMBER; try again.
3. If desired, customize the second line of the message: Use any combination of the fol-
lowing methods.
• Remain in numeric mode: Press the keypad buttons to enter the desired number.
Use the pound (hash) button ( ) for a hyphen (-) and the asterisk button ( ) for
a colon (:). Phone users can press the button once to leave a space, or
press the button to backspace.
• Change to alphanumeric mode (phones only): Press the button (the button
lights) or the
USE ALPHA MODE menu button, then enter the desired characters.
See the chart above. Phone users can press the button once to advance or
twice to leave a space, or press the button to backspace.
• Use speed-dial and/or redial numbers (phones only): In either numeric or alpha-
numeric mode, you can speed dial a number (using the speed-dial button or fea-
ture code). In numeric mode you can press the button to enter the stored
characters. You may chain speed-dial and/or redial numbers together.
4. Terminate programming:
Phone: Press the Speaker button or
ACCEPT. Or, lift and replace the handset. The DND
button lights. (Display phones show selected message. Date and time appear on the sec-
ond line if there is no customized message.)
Single-Line Set: Hang up.
46.14 To cancel do-not-disturb:
Phones with Menu Buttons: While on hook, press the lit button. The button
goes off and the display shows DO NOT DISTURB OFF.
Other Phones: While on hook, press the lit button or enter the Cancel Do-Not-
Disturb feature code (371) or Do-Not-Disturb On/Off feature code (372). The button
goes off and the display shows DO NOT DISTURB OFF.
Single-Line Set: Lift the handset, enter the Cancel Do-Not-Disturb feature code (371)
or Do-Not-Disturb On/Off feature code (372), and hang up.
To Next Page
Loading...
