Page 6-25
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Merged Items
PROGRAMMING
6
— BRS/BRU - Station/Station, Trunk/Trunk Ports
— DKSC/16 - Keysets
— EKSC - Keysets
— SLC/16 - Single lines
— Analog Keyset Card - Keysets
— OPC - Serial Port
• Call Routing Tables, Keymaps, Speed Dials, and Forwarding Paths: When call
routing tables, keymaps, speed dials, and forwarding paths are merged, they are
assigned the next available master database ID that corresponds to the type. For
instance, if the master database contains forwarding paths with IDs 1, 2, 4, 6, and 7, the
merged forwarding paths are assigned IDs 3, 5, 8, 9, 10, etc. Each item is then merged
until the database maximum is reached. If this limit is exceeded, all references to items
not merged are set to the first ID in the corresponding list.
Speed dials and forwarding paths that are already included in the master database are
not merged. Instead, all references to these items are re-assigned to the matching item in
the master database.
• Voice Mail: If voice processing is enabled in one of the databases that is being merged,
the voice processing flag in the master database is also enabled. In addition, the follow-
ing information is copied if there are no entries in the corresponding table in the master
database:
— Audiotex Recordings
— Auto Attendant
— AVDAP Information
— Disk Statistics
— DTMF Detection
—Fax-On-Demand
— Maintenance AVDAP
— Reports AVDAP
— SMDR AVDAP
— Subscriber Statistics
— Timers And Limits AVDAP
— Voice Mail
• Local Node Devices: The local node devices that are merged include:
—ACD Agent IDs
— CO Trunk Groups
— Digit Translation Nodes
— Extension Lists
— Extension IDs
— Group Lists
— Hunt Groups
To Next Page
Loading...
