IN-1
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
INDEX
Numerics
1+1 optical port protection
switch traffic see external switching commands
create
17-81
delete 18-23
description 4-11
modify 18-22
test 17-85
verify active⁄ standby status for a port 18-60
1:1 electrical card protection
convert DS-1 cards to 1:N protection
18-56
convert DS3-12E cards to 1:N protection 18-59
convert DS-3 cards to 1:N protection 18-57
create 17-78
delete 18-23
description 4-10
modify 18-20
1:N electrical card protection
description
4-10
convert DS-1 cards to 1:N protection 18-56
convert DS3-12E cards to 1:N protection 18-59
convert DS-3 cards to 1:N protection 18-57
create 17-80
delete 18-23
modify 18-21
A
A_LAW 17-85
add⁄ drop multiplexer see linear ADM
administrative states
see also service states
change for a VCAT circuit
21-15
provision for a DS1-14 card 18-29
provision for a DS3/EC1-48 card 20-81
provision for a DS3-12 card 18-33
provision for a DS3-12E card 18-38
provision for a DS3i-N-12 card 22-23
provision for a DS3XM-12 card 20-76
provision for a DS3XM-6 card 18-42
provision for an EC1-12 card 18-46
provision for an FC_MR-4 card 21-17
provision for OC-N cards 18-50
ADM see linear ADM
AEP
connect external wire-wrap panel
1-16
install on backplane 1-12
pin assignments 1-15
see also AIC-I card
AIC card
install
17-47
change external alarms 18-54
change external controls 18-54
change orderwire settings 18-55
modify settings 11-3
provision orderwire settings 17-84
upgrade to the AIC-I 12-12
AIC-I card
install
17-47
backplane pin assignments 17-23
change external alarms 19-6
change external controls 19-7
change orderwire settings 19-8
modify settings 11-4
provision orderwire settings 17-84
To Next Page
Loading...
Need help?
General
