Page 6-233
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
CO Trunk Groups
PROGRAMMING
6
NOTE: When determining toll restriction for an ARS outgoing call, the network only
checks the station toll restriction for the node on which the calling station resides. The
system does not check the trunk class of service for ARS calls. See page 6-281 for a
complete explanation of the Classes of Service. To program the toll restrictions double-
click on Classes of Service, you then have the option of choosing Day or Night. Dou-
ble-click on the desired time period to view a list of current classes of service.
To add a class of service:
a. Right-click in the window and select Add To List.
b. A window appears that allows you to select the types of toll restrictions you want
to program. Select
ARS Only & Deny Area/Office and/or Classes of service and
then select
Next.
c. Another window appears that shows you a list of available classes of service. (You
can view them in a list by selecting the List button or view details by selecting the
Details button.)
d. Highlight the desired class(es) of service and then select Αδδ Ιτεμσ. The selected
classes of service appear in the list. Select
Finish to exit.
e. (U.S. only) If you selected Deny Area/Office class of service, the trunk group must
also be assigned to a User Group. To change the user group, right-click on
User
Group
and select Change User Group. In the first window that appears, select
User Groups and then Next. In the next window, select the desired user group and
then select
Finish to exit and save the change.
To delete one or more classes of service: Highlight the item(s). Then right-click and
select
Remove Selected Items.
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
item. To highlight two or more that are not consecutive, hold down CTRL while selecting
the desired items.
• Subject to toll restriction: If the trunk group is not subject to toll restriction, the station
and trunk classes of service (except ARS-Only restriction) are not checked when a
trunk in the group is used. To enable this flag, select the current Value and then select
the check box to place a check in it. Then press
ENTER or select another field to save
the change. (To remove the check and disable the flag, select the check box again.)
• Exempt from ARS only: The trunk group can be exempt from, or subject to, the ARS-
only restriction. If exempt from ARS-only, stations with that restriction can directly
select the trunks. If subject to ARS-only, ARS-restricted stations can use the trunk
group only if it is part of an ARS route group. To enable this flag, select the current
Value and then select the check box to place a check in it. Then press
ENTER or select
another field to save the change. (To remove the check and disable the flag, select the
check box again.)
• Call Cost: For trunk groups that are not subject to toll restriction, the call cost rate to be
used for calls placed on the trunks can be free, local, toll local, toll long distance, opera-
tor-assisted, or international rate. Select the Assigned Call Cost value and then scroll to
the desired setting. Then press
ENTER or click outside the field to save your change.
• Absorbed Digits: Trunk groups can be programmed to absorb digits in areas where the
first digit(s) of the office code are absorbed. There can be up to 50 patterns with up to
48 digits each. To enable this flag, select the current Value and then select the check box
to place a check in it. Then press
ENTER or select another field to save the change. (To
remove the check and disable the flag, select the check box again.)
To Next Page
Loading...
