Page 6-232
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
CO Trunk Groups
4.297 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
Remove Selected Items.
Day/Night Outgoing Access
4.298 There are separate lists for stations with outgoing access in day and night modes. (On
loop start trunks that are connected to paging equipment, the outgoing access designation does
not affect stations’ ability to seize the trunk for paging. Trunks used for paging should not
allow any station to have outgoing access for placing outside calls.) By default, the automatic
station list (Auto: All Stations) is assigned to Day/Night Outgoing Access when a CO Trunk
Group is created. To program the stations that will have outgoing access for the trunk group,
select
Outgoing Access and then Day Mode or Night Mode and do the following:
4.299 To add extensions to the list:
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the device type(s) and then select Next. A list appears. (You can view them in a
list by selecting the List button or view details by selecting the Details button.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
4.
Highlight the appropriate items and then select Add Items. When you have added all
the desired devices select
Finish. Your selections appear in the list.
NOTE: If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
4.300 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
Remove Selected Items.
Toll Restriction
4.301 To program toll restriction for the trunk group, double-click on Toll Restriction. Each
trunk group can have the following toll restriction parameters programmed.
NOTE: On loop start trunks that are connected to paging equipment, toll restriction does not
affect stations’ ability to seize the trunk for paging.
• Class Of Service: Each trunk group has Classes of Service (COS) which restrict or
allow certain dialing patterns from being dialed on a call.
NOTICE
It shall be the responsibility of the entity or person(s) completing installation and mainte-
nance of hardware or software described herein to research, comply with and be responsi-
ble for the specific governmental rules and regulations regarding Emergency Outgoing
Access 911 [999] of the geographic location in which such functions are performed.
To Next Page
Loading...
