Page 6-231
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
CO Trunk Groups
PROGRAMMING
6
4.293 To add extensions to the list:
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the device type(s) and then select Next. A list appears. (You can view them in a
list by selecting the List button or view details by selecting the Details button.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
4.
Highlight the appropriate items and then select Add Items. When you have added all
the desired devices select
Finish. Your selections appear in the list.
NOTE: If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
4.294 To delete destinations from the list: To delete an item from the list, highlight them and
then right-click. Select
Remove Selected Items.
Day/Night Emergency Outgoing Access
4.295 There are separate lists for stations with emergency outgoing access in day and night
modes. (On loop start trunks that are connected to paging equipment, the emergency outgoing
access designation does not affect stations’ ability to seize the trunk for paging. Trunks used
for paging should not allow any station to have emergency outgoing access.) By default, the
automatic station list (Auto: All Stations) is assigned to Day/Night Emergency Outgoing
Access. To program the stations that will have emergency outgoing access for the trunk group,
select
Emergency Outgoing Access and then Day Mode or Night Mode and do the follow-
ing:
4.296 To add extensions to the list:
1. Right-click anywhere in the right side of the window. An option box appears.
2. Select Add To List. A window appears that asks you to select the type of device to
include.
3. Select the device type(s) and then select Next. A list appears. (You can view them in a
list by selecting the List button or view details by selecting the Details button.)
NOTE: To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
4.
Highlight the appropriate items and then select Add Items. When you have added all
the desired devices select
Finish. Your selections appear in the list.
NOTE: If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
To Next Page
Loading...
