Page 6-368
Programming
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Programming VM Applications
2. Select Time Slot Group and then select Next. A list of time slot groups appears. (You
can view them in a list by selecting the List button or view details by selecting the
Details button.)
3. Select the desired group and then select Finish. The new time slot group appears in the
field.
NOTE: If you would like to view the programming for the selected time slot group, dou-
ble-click on Time Slot Group to jump to the time slot programming area.
Transfer Recall Destination
4.36 This is the station, hunt group, or application that will receive any calls that recall after
being transferred by the application. (For the Auto Attendant, this is usually the Automated
Attendant Recall application).
4.37 To select the Transfer Recall Destination for the application, use one of the following
methods:
Method A
1. Select the current Value and enter the new value in the text box.
2. Press ENTER. A screen appears showing you what is associated with the number you
entered.
3. Select OK. The new number appears in the field.
Method B
1. Right-click on Transfer Recall Destination. An options box appears. Select Change
Transfer Recall Destination
. A window appears that asks you to select the type to
include.
2. Select the desired destination type and then Next. You will see a list of fax documents,
devices, or digit translation nodes that are present in the system.
3. Select the desired application and then select Finish. The new destination appears in the
Transfer Recall Destination field.
NOTE: If you would like to view the programming for the selected application, double-
click on Transfer Recall Destination to jump to the application’s programming area.
Automatic Speech Recognition (ASR) Setting
4.38 (EM systems only) Determines whether the system will use the ASR Enabled setting in
the current folder level or in the next folder level. For details about this field, see page 6-348.
Automatic Speech Recognition (ASR) Enabled
4.39 (EM systems only) Determines whether or not ASR is enabled for the current folder
(and any subfolders or parent folders based on the ASR Setting field). If enabled, the system,
application, or mailbox supports voice recognition for accessing that particular feature. If dis-
abled, the system, application, or mailbox will not support voice recognition. For details about
this field, see page 6-348.
NOTE: The ASR Enabled field is ignored (that is, displays a red “x”) if the ASR Setting is set
to Delegated, Ignored, or Ignored and Delegated.
To Next Page
Loading...
