Page 3-167
Installation
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
ASX-200BX
INSTALLATION
3
Configure Domain Name System (DNS) service? (yes, no) [yes]
Type no and press
ENTER.
Would you like to select a new password? (yes, no) [no]
Type yes and press
ENTER.
Enter the new password:
Type attitude and press
ENTER. The switch does not echo any characters.
Please enter it again:
Type attitude and press
ENTER. The switch does not echo any characters, but it
responds with “The password has been changed.”
Configure SNMPv1/v2? (yes, no) [yes]
Type no and press
ENTER.
Configure SNMPv3? (yes, no) [no]
Press
ENTER.
Configure SNMP event logging station? (yes, no) [yes]
Type no and press
ENTER.
Configure IP filtering (If you are running “startup” remotely, you should add the IP
address of your host first. Otherwise, you will lose IP connectivity to the switch)? (yes,
no) [no]
Press
ENTER. The switch responds with “Default ELAN exists. Your switch has now
been configured.”
11.12 You can now connect to the switch using a telnet session.
To Next Page
Loading...
