Page 3-209
Installation
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Optional Handset Amplifiers
INSTALLATION
3
3. Mount the modular jack assembly on the wall at the station location.
4. Plug one end of the line cord into the modular jack (line jack unit) assembly and plug
the other end into the jack on the single-line set or playback device.
Optional Handset Amplifiers
13.47 Single-line set users may want to have a handset amplifier installed. Typically, the
amplifier is an external unit that is placed between the single-line set and the handset (see
page 2-85 for specifications).
13.48 To install such an amplifier:
1. Unplug the coiled handset cord from the single-line set.
2. Plug the coiled handset cord into the amplifier jack labeled HANDSET.
3. Plug the amplifier line cord (coming from the jack labeled TELEPHONE) into the sin-
gle-line set handset jack.
4. Plug the amplifier power supply cord into an AC outlet.
5. The handset volume can be increased or decreased, using the thumbwheel located on
the amplifier. Verify that the amplifier is functioning correctly by placing a call and
adjusting the volume from low to high.
To Next Page
Loading...
