Page 5-16
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Station Feature Codes
Barge-In 386 Accessed as an option from the Station Monitor feature
(321) the Barge-In feature allows the supervisor to
barge-in on a call to help the hunt group member/agent.
CO Hookflash (Recall) 330 Sends a timed hookflash (recall) over the trunk while on
an outside call (includes conference calls).
Call Forward All Calls 355 Immediately forwards all calls to another station or to an
outside telephone number. (Inter-Tel phones use the
FWD button.)
Call Forward If Busy 357 Immediately forwards all calls to another station or to an
outside telephone number when the station is in use.
Call Forward If No Answer 356 Forwards all calls to another station or to an outside tele-
phone number if not answered within a predetermined
time.
Call Forward If No Answer/Busy 358 Forwards all calls to another station or to an outside tele-
phone number if not answered within a predetermined
amount of time or immediately if the station is in use.
Call Logging 333 Allows digital/IP endpoints and IP softphone users to
view the missed, received, and dialed call logs on their
endpoint. If the endpoint does not support Call Logging
or if the Enable Call Logging flag is not enabled, when
the user enters this feature code the endpoint displays
an error message and receives a corresponding error
tone. Non-display endpoints only receive the error tone.
See page 5-180 for details.
Change Language 301 A station user can change the assigned language for the
station by entering the Change Language feature code
while the station is idle.
Conference 5 Connects from three to four parties in a conference. A
conference consists of any combination of inside and
outside parties. (Inter-Tel phones use the CNF button.)
Data 340 (Inter-Tel Phones Only) Allows operation of a data device
attached to a phone that has a PC Data Port Module and
a Modem Data Port Module (also requires a modem-
equipped data device). (Analog phones have a default
DATA button.)
Default Station 394 This single feature code cancels account codes for all
calls following, do-not-disturb, manual call forwarding,
background music, ring intercom always, and queue
requests; restores handsfree mode, pages, hunt group
calls, and system forwarding; and returns phone volumes
to default values.
Directory 307 (Display Phones Only) Allows display phone users to
search for extension numbers or system speed-dial num-
bers. The number can then be dialed, if desired. This
feature requires the Directories software license.
Table 5-2. Station Feature Codes (Continued)
Feature Name
U.S. [Europe]
Code
Definition
To Next Page
Loading...
