Inter-Tel AXXESS - Page 609

Page 5-83
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Caller ID Forwarding
FEATURES
5
Scenario #5: An extension calls another extension that is routed to an outside number through
station forward, OAI, or Send to Destination. Same Node or remote Node intercom calls are
processed the same.
Table 5-19. Caller ID Forwarding for Intercom Calls
Type of Call When: Is Set to:
The System
Sends:
Intercom
Call
Calling Party Number and/or Name No entry No Caller ID
information
Propagate Original Caller ID
--
1
1. This flag or entry has no affect on the situation because the other flags that are enabled have
priority, the call condition does not apply, or caller information is not provided.
Send STN Caller ID to Attached PBX No
Propagate Original Caller ID on Transfer
--
1
Calling Party Number and/or Name An outside tele-
phone number/
name
See footnote
2
2. The Calling Party Field is only sent if the endpoint places an outbound call or if an endpoint
intercoms another extension that is forwarded to an outside number. Incoming calls routed to
an endpoint that are forwarded or processed by OAI from an endpoint to an outside number
do not provide Calling Party Number. The Calling Party Number is not sent if an incoming
unanswered call immediately routes to an outside number through Call Routing Table or
directly to a trunk group or through station forward of any type.
Propagate Original Caller ID
--
1
Send STN Caller ID to Attached PBX No
Propagate Original Caller ID on Transfer
--
1
Calling Party Number and/or Name No entry or an
outside tele-
phone number/
name
1
User name and
extension from
the calling
extension. Call-
ing Party Num-
ber is not sent.
Propagate Original Caller ID
--
1
Send STN Caller ID to Attached PBX Yes
Propagate Original Caller ID on Transfer
--
1