Inter-Tel AXXESS - Page 627

Page 5-101
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Automatic Route Selection (ARS)
FEATURES
5
10.139When ARS is used, the station user hears dial tone when the feature code is entered
(manually or automatically using a CALL button, the ARS button, or the button).
The user then dials the number and hears silence until the trunk is seized and dialing is com-
pleted. (The user will not hear the digits being dialed.) The call appears under an available
CALL button or trunk button.
OUTGOING
AUTOMATIC ROUTE SELECTION EXAMPLE FOR THE U.S.
Station user enters 1234
account code and dials
1-602-961-9000
SYSTEM
CO
OUTGOING CALL
DIALED =
1-602-961-9000-1234
ARS does the following:
• Checks the number and
finds dialing pattern
602+ in Route Group 2.
• Selects a facility group
with an available trunk.
• Checks toll restriction
and outgoing access.
• Uses dial rules to mod-
ify the number:
Echo 3 Digits After Toll
Echo Local Address
Add Account Code
• Dials the modified num-
ber.
1
2
AUTOMATIC ROUTE SELECTION EXAMPLE FOR EUROPE
Station user enters 1234
account code and dials
619000
Axxess
CO
OUTGOING CALL
DIALED =
6190001234
ARS does the following:
• Checks the number and
finds dialing pattern in
Route Group 2.
• Selects a facility group
with an available trunk.
• Checks toll restriction
and outgoing access.
• Uses dial rules to mod-
ify the number:
Echo Local Address
Echo Account Code
• Dials the modified num-
ber.
1
2