Page 1-30
Overview
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Administrator Features
• Recall destination for unanswered calls
• Immediate off-hook voice announce (OHVA) calls (requires special programming and a
DSS/BLF Unit or an Executive Display, Professional Display, Standard Display, Asso-
ciate Display, Model 8520, or Model 8560 Phone with assigned DSS/BLF buttons)
NOTE: The Associated and Professional Display Phones are supported by U.S. soft-
ware only.
H. ADMINISTRATOR FEATURES
• Place the local node or other nodes in the network in night mode or day mode
• Set the date and time of the local node
• Set the network date and time and re-synchronize clocks in the network.
• Make database changes (see page 5-276 for a list of programming areas)
• Program system speed-dial numbers on the local node
• Receive and clear displayed system and network alarms
• Use diagnostic mode features:
— Freeze and unfreeze database history on local nodes or other nodes in the system
using freeze “zones”
— Print error logs
— Seize specific devices for troubleshooting purposes
• Use Diagnostic - dump node information feature code
• Swap extensions without accessing DB Programming
• Enable/disable the modem on the CPC
• Reset the modem on the CPC
I. ATTENDANT CONSOLE FEATURES
NOTE: Versions 7.0 and later software does not support Attendant Console version 2.0. If run-
ning version 7.0 or later, Attendant Console version 3.0 is required.
• Designed for use with Microsoft Windows operating system software
• Quick, simple call answering and transfer
• Visual display of system call activity, system directories, system alarms, date and time,
etc.
• Automatic call priority
• Optional headset operation
• Swap extension feature
NOTE: See page 2-83 for additional information.
To Next Page
