Page 5-293
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Trunk Groups
FEATURES
5
For U.S. Systems:
COS 02 – Deny Area/Office
COS 03 – Deny Operator
COS 04 – Deny Toll Access
COS 05 – Deny International
COS 06 – Deny Equal Access
COS 07 – Deny Local Calls
COS 08 – Denied Numbers
COS 09 – Allowed Numbers
For European Systems:
COS 02 – Deny Operator
COS 03 – Deny Toll Access
COS 04 – Deny International
COS 05 – Deny Local Calls
COS 06 – Denied Numbers
COS 07 – Allowed Numbers
2.) Exempt from ARS: To program the Exempt from ARS option, press or the
EXEMPT FROM ARS menu button. When the display shows EXEMPT
FROM ARS, press or the
YES menu button to enable the option. Or,
press or the
NO menu button to disable it. Then press or ACCEPT to
continue.
3.) Subject to toll restriction: To program the trunk group Subject to Toll
Restriction option, press or the
SUBJECT TO TOLL menu button. When
the display shows SUBJECT TO TOLL, press or the
YES menu button to
enable the option. Or, press or the
NO menu button to disable it. Then
press or
ACCEPT to continue.
Trunk List: To program the list of trunks for the trunk group, press or the
TRUNK LIST menu button. When the display shows ENTER TRUNK EXTEN-
SION, enter trunks into the list as follows:
1.) Enter a trunk extension using one of the methods described in paragraph
52.36.
2.) The display shows the extension number and a Yes/No prompt. Press or
the
YES menu button, followed by , to include the trunk in the list. Or,
press or the
NO menu button, followed by , to exclude the trunk from
the list.
3.) When the display returns to ENTER TRUNK EXTENSION, select another
extension number. Or, if finished programming the trunk list, press or
ACCEPT to continue.
a. To exit, press or ACCEPT to move backward through the prompts until you
reach the ENTER DATABASE OPTION prompt.
6. When finished with all programming, press while the ENTER DATABASE
OPTION prompt is displayed. This ends the programming session.
To Next Page
Loading...
