Inter-Tel AXXESS - Page 818

Page 5-292
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Trunk Groups
5. To Program A Trunk Group: Press or the TRUNK GROUP menu button. Then
program the trunk group, as follows:
a. The display shows ENTER TRUNK GRP EXTENSION. Enter the extension
number of the trunk group to be programmed using one of the methods described
in paragraph 52.36.
b. The display shows ENTER TRUNK GROUP OPTION. Select one of the follow-
ing options. To view the last three options on an Executive Display, Professional
Display, or Model 8560 Phone, press the arrow (<< or >>) menu button at the bot-
tom of the display.
Answer Access For Day Or Night Mode: To program the station(s) that will have
answer access for this trunk group for day mode, press or the
ANS-ACCESS
DAY menu button. To program for night mode, press or the ANS-ACCESS
NIGHT
menu button. When the display shows ENTER STATION EXTENSION,
do the following:
1.) Enter a station extension using one of the methods described in paragraph
52.36.
2.) The display shows the extension number and a Yes/No prompt. Press or
the
YES menu button, followed by , to include the station in the list. Or,
press or the
NO menu button, followed by , to exclude the station from
the list.
3.) When the display returns to ENTER STATION EXTENSION, select another
extension number. Or, if finished programming the station list, press or
ACCEPT to continue.
Ring-In For Day Or Night Mode: To program the station that will have ring in
for this trunk group for day mode, press or the
RING-IN DAY menu button. To
program for night mode, press or the
RING-IN NIGHT menu button. When the
display shows ENTER STATION EXTENSION, enter stations into the list one at
a time as described above for Answer Access.
Toll Restriction: To program the toll restrictions for the trunk group, press or
the
TOLL RESTRICTION menu button. When the display shows TOLL
RESTRICTION OPTION, press the numbers that correspond to the toll restric-
tions you want to program, as follows:
1.) COS for day or night mode: To program the toll restriction class of service
for day mode, press or the
COS DAY menu button. To program class of
service for night mode, press or the
COS NIGHT menu button. The dis-
play shows SET DAY (or NIGHT) COS XX. If this is not the COS you want
to program, scroll to the correct COS by pressing the high end of the Volume
button or the
NEXT menu button to scroll forward, or press the low end of
the Volume button or the
PREVIOUS menu button to scroll backward. The
default COS numbers are listed below. (See page 5-103 for definitions. COS
01 is not used for trunks.) When the correct COS is displayed, press or
the
ON menu button to enable the toll restriction. Or, press or the OFF
menu button to disable it. If desired, repeat this step to program additional
COS toll restrictions. Then press or
ACCEPT to continue.
2
1
2
1
#
2
#
#
3
4
5
1
2
1
2
#