Page 5-298
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Programming System Speed-Dial Numbers
* The character available depends on the software version.
** The Japanese characters are only available if the Multilingual feature is enabled and Japanese is
installed as the secondary language.
52.42 To program or change system speed-dial numbers and names:
NOTE: If you make a mistake, use the button to backspace. Or, press or CANCEL
at any time to cancel the operation (the name and number in memory remains unchanged and
the display shows FEATURE CANCELED); then start over.
1.
While on hook, enter the Program System Speed-Dial feature code (9801). Display
phones show PROGRAM SYS SPD # (000-999 or 0000-4999).
2. Enter the speed-dial location code (000-999 or 0000-4999). The display shows ENTER
NAME: (current name). If you do not continue to the next step, the display times out
after the Long Interdigit timer expires and you must start over.
3. To change or program the name: Enter the desired name for the speed-dial number
using your keypad as described on page 5-297, then press or
ACCEPT. See the chart
on the previous page. If you make a mistake, use the button to back up and erase
existing characters or the
CLEAR button to erase the whole entry.
To erase the current name and leave it blank: Press
CLEAR or press repeat-
edly until the name is erased. Then press or
ACCEPT.
To leave the name the same: Press or
ACCEPT.
4. When the display shows ENTER NUMBER, enter the number (up to 48 digits) to be
stored using the keypad, one of the speed-dial buttons, or the button. If neces-
sary, use the button to back up and erase existing numbers. (Display phones
show the number as it is entered.) To include *, #, pause, or hookflash (recall) in the
number, press or
once for an asterisk (*), twice for a pound [hash] (#),
three time for a hookflash/recall (F), or four times for a pause (P). Menu button phone
users can press the *, #,
FLASH, or PAUSE menu buttons to enter special characters.
You cannot exceed 48 digits.
5. Press or ACCEPT to save the number. You hear a single progress tone when the
number is accepted. Your display shows SYS SPD BIN #XXX UPDATED.
Number of Times Button is Pressed
BTN 1 2 3 4 5 6 7 8 9 10 11
English/Spanish Characters Katakana Characters**
1- &( ) 1A I U E O a
2ABC’ 2KA KI KU KE KO i
3DEF! 3SA SHI SU SE SO u
4GHI * 4TA CHI TSU TE TO e
5 J K L # or /* 5 NA NI NU NE NO o
6MNOÑ or #* 6 HA HI FU HE HO tsu
7PQRS 7MA MI MU ME MO ya
8TUV? 8YA YU YO . , yu
9WXYZ 9RA RI RU RE RO yo
0@: . , 0WA WO N pa ba long
To Next Page
Loading...
