Page 2-87
Specifications
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Playback Devices
SPECIFICATIONS
2
O. PLAYBACK DEVICES
NOTE: For automated attendant features and for optimal playback device performance and
functionality, use the Voice Processing PC and applications software instead of SLA circuits.
5.77 AC-ringing playback devices may be connected to SLCs (up to eight per card) and/or
SLC-16s (up to 16 per card) or to SLAs (up to two per adapter). (See page 3-208 for playback
device installation instructions.) A playback device is an answering machine that answers the
call, plays a message, and then disconnects from the call. Playback devices are installed like
single-line sets, using one-pair twisted cable and four-conductor modular jacks (line jack
units). The device must be capable of the following functions: detect ringing, provide ring trip,
and automatically disconnect when the announcement is completed.
5.78 Playback devices may be used with hunt groups to speed call processing. Hunt groups
can have three types of special stations: announcement stations, overflow stations, and recall
destination stations. These types of stations may be equipped with a playback device that
answers the call, then disconnects to transfer it back to the hunt group. (See FEATURES,
page 5-37, for more information.)
5.79 The playback device is programmed as a regular single-line station and is assigned an
extension number. If the device is sensitive to camp-on tones and disconnects calls, the pro-
grammer can disable the camp-on indications for that station circuit (see PROGRAMMING,
page 6-210).
To Next Page
Loading...
