Page 1-28
Overview
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Single-Line Features
• Speakerphone on/off
• Slide-out directory card
• User-programmable ring tone
• Self-test function
• Hearing aid-compatible (HAC) handset
• Reversible baseplate for wall mounting
•∗ Optional headset
•∗ Background music
• Microphone mute
• Handsfree answer enable/disable
• On-hook dialing/monitoring
• System hold
• Station call monitoring (hunt group supervisors only)
• Do-not-disturb override (the ability to override do-not-disturb may be enabled/disabled
on a station-by-station basis)
• Page remove/replace
• Intercom (extension number) and outside (system speed-dial number) directories
• Feature directory to locate and/or dial feature codes
• Automatic intercom and/or outside call access
• Redirect call feature code
• LCD contrast feature code (Models 8662, 8622, 8620, 8660, and 8560 only)
• Dedicated headset jack (Model 8520 and 8560 Phones only)
• Programmable Message Lamp (Model 8500, 8520, and 8560 Phones only)
• Network Address Translation (NAT) traversal for IP endpoints
C. SINGLE-LINE FEATURES
• Audio message waiting indication capability
• Programmable hookflash/recall recognition
• Programmable ring cadence and gain levels for OPX applications
• Optional SLA for connecting an off-premises extension to the DKSC
•∗ Caller ID [CLIP] support
•∗ Pulse dialing support for single-line sets (version 2.x or later software is required)
To Next Page
