Page 5-182
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Call Logging Displays on a Two-Line Display Endpoint
To scroll through the entries, press the >> menu button or the volume up button to
scroll forward, or press << or the volume down button to scroll backward. If there is no
previous page or entry, the << menu button is unavailable and the volume down button
is unresponsive. Likewise, if there is no next page or match, the >> menu button is
unavailable and the volume up key is unresponsive. For an analog display endpoint that
does not have a volume soft button, press to scroll forward and to scroll back-
ward.
To delete the entry, press
DELETE or . The display will then show the next entry in
the list or will go back to the main menu if the list is empty.
To delete all entries, press
DEL ALL or .
To place a call, press
CALL NOW or the pound/hash ( ) button.
The Missed Calls Menu. (For six-line display endpoints only) If the user has any
missed calls that have not yet been viewed, the “MISSED XX” (where XX can be from
1-99) calls menu option appears on the six-line display endpoint, as shown below.
When the user selects the “MISSED XX” calls menu option or enters the Call Logging
feature code (333), the display changes to the Missed Calls menu that is similar to the
Call Logs display on page 5-181. From there, they can navigate just as they could if
they accessed the Missed Calls menu from the LOGS menu.
After the Missed Calls menu option is selected, the idle display will no longer show
“MISSED XX” on the display whether the user looked at every one of the recently
missed calls.
B. CALL LOGGING DISPLAYS ON A TWO-LINE DISPLAY ENDPOINT
NOTE: At any menu level, you can press the asterisk ( ) button to cancel or return to the
previous menu, or press the pound/hash ( ) button to accept.
23.8 The following are examples of the call logging displays on a two-line endpoint:
• The Main Menu. Two-line display users must use a feature code to access the Call
Logs. When the user enters the Call Logging feature code (333), the following display
appears prompting them to specify which Call Log they want to access or if they want
to clear all call logs.
29999 JOHN DOE
1:53 FRI AUG 20
MISSED 10
OUTGOING DND
DIRECTORY LOGS
OTHER FEATURES
Non-Admin Endpoint
29999 JOHN DOE
1:53 FRI AUG 20
ADMIN MISSED 10
OUTGOING DND
DIRECTORY LOGS
OTHER FEATURES
Admin Endpoint
LOG TYPE: MISS=1
RCV=2 DL=3 CLR=4
To Next Page
Loading...
