Page 5-279
System Features
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
Station Programming Using an Administrator's Station
FEATURES
5
Scroll through the numbers: To scroll through the extension number list, press the
high end of the Volume button or the
NEXT button to scroll forward, or press the low
end of the Volume button or the
PREVIOUS button to scroll backward. When the
desired extension number is displayed, press or
ACCEPT to continue.
5. The display shows ENTER STATION OPTION. Select one of the following:
a. Station Flags: Allows you to set the Administrator Station, Attendant, and House
Phone flags. To select it, press or the
STATION FLAGS menu button. There are
three flags that can be programmed: Administrator, Attendant, and House Phone.
(However, you cannot program the Administrator flag for your own station or for
a single-line station.) To program the flags, do the following:
1.) To scroll to the desired flag: Press the high end of the Volume button or the
NEXT button to scroll forward, or press the low end of the Volume button or
the
PREVIOUS button to scroll backward.
2.) To enable or disable a displayed flag: Press or the ON menu button to
enable the flag. Or, press or the
OFF menu button to disable the flag.
3.) To save your programming when all flags are set correctly: Press or
ACCEPT to save the new flag settings. The display shows DATABASE
UPDATED and then returns to the ENTER STATION OPTION prompt.
4.) To exit without saving your changes: Press or CANCEL to exit. The dis-
play shows NO UPDATE PERFORMED and then returns to the ENTER
STATION OPTION prompt.
b. Station Information: Allows you to select an attendant for the station or program
the station’s username. To select it, press or the
STATION INFO menu button.
The display shows ENTER STATION INFO OPTION. Select one of the follow-
ing:
1.) Attendant: To assign an attendant to serve this station, press or the
ATTENDANT menu button. The display shows ENTER ATTENDANT
EXTENSION. Enter the desired extension number. When the circuit infor-
mation is displayed, press again to return to the ENTER STATION INFO
OPTION prompt. The display shows DATABASE UPDATED. (Or, to cancel
your entry, press or CANCEL. The display shows NO UPDATE PER-
FORMED.)
2.) Username: To change the username of the station, press or the USER-
NAME
menu button. The display shows ENTER USERNAME. Enter the
new name as described in paragraph 52.26 on page 5-277. (Or, to cancel
your entry, press or
CANCEL. The display shows NO UPDATE PER-
FORMED.)
To Next Page
Loading...
