Send documentation comments to mdsfeedback-doc@cisco.com
46-23
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 46 Configuring Port Security
Default Settings
Port Security Database Cleanup
To clear all existing statistics from the port security database for a specified VSAN using Fabric
Manager, follow these steps:
Step 1 Expand a Fabric, expand a VSAN and then select Port Security in the Logical Domains pane.
You see the Port Security information in the Information pane (see Figure 46-8).
Step 2 Click the Statistics tab.
You see all the configuration databases.
Step 3 Select the appropriate configuration database and check the Clear option.
Step 4 Click the Apply Changes icon to save your changes.
To clear any learned entries in the active database for a specified interface within a VSAN using Fabric
Manager, follow these steps:
Step 1 Expand a Fabric, expand a VSAN and then select Port Security in the Logical Domains pane.
You see the Port Security information in the Information pane.
Step 2 Select the Actions tab. You see all the configuration databases.
Step 3 Select the appropriate configuration database and check the AutoLearn option.
Step 4 Click the Apply Changes icon to save your changes.
Note You can clear the Statistics and the AutoLearn option only for switches that are local and do not acquire
locks. Also, learned entries are only local to the switch and do not participate in distribution.
Default Settings
Table 46-5 lists the default settings for all port security features in any switch.
Table 46-5 Default Security Settings
Parameters Default
Auto-learn Enabled if port security is enabled.
Port security Disabled.
Distribution Disabled.
Note Enabling distribution enables it on all VSANs in the switch.
To Next Page
Loading...
Need help?
General
