Send documentation comments to mdsfeedback-doc@cisco.com
13-19
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 13 Using the CFS Infrastructure
CFS Regions
Figure 13-12 Feature by Region Tab
Step 3
Double-click the RegionId cell in the required row.
The cursor blinks in the cell prompting a change in the value.
Step 4 Change the RegionId value to the required region.
Step 5 Click the Apply Changes button on the tool bar to commit the change.
Removing a Feature from a Region
To remove a feature from a region using Fabric Manager, follow these steps:
Step 1 Click the Feature by Region tab and select the required row.
Step 2 Click the Delete Row button on the toolbar.
Figure 13-13 shows a confirmation dialog box.
Figure 13-13 Removing a Feature from a Region
Step 3
Click Yes to confirm row deletion from the table in view.
Deleting CFS Regions
To delete an entire region, follow these steps:
Step 1 Click the All Regions tab and select the required row.
Step 2 Click Delete Row.
This action removes all entries pertaining to that switch and region in the table under Feature by Region
tab.
To Next Page
Loading...
Need help?
General
