Send documentation comments to mdsfeedback-doc@cisco.com
36-19
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 36 Configuring FICON
Configuring FICON
Figure 36-10 All VSANs Table
Step 2
Click anywhere in the row of the VSAN that you want to delete.
Step 3 Click Delete Row to delete the VSAN.
Note Deleting the VSAN will also delete the associated FICON configuration file, and the file cannot
be recovered.
Suspending a FICON VSAN
To suspend a FICON VSAN using Fabric Manager, follow these steps:
Step 1 Click All VSANs.
You see all the VSANs listed in the Information pane.
Step 2 Select the VSAN that you want to suspend.
Step 3 Set the Admin drop-down menu for a VSAN to suspended.
Step 4 Click the Apply Changes icon to save these changes.
Note This command can be issued by the host if the host is allowed to do so (see the “Allowing the Host to
Move the Switch Offline” section on page 36-21).
Configuring the code-page Option
FICON strings are coded in Extended Binary-Coded Decimal Interchange Code (EBCDIC) format.
Refer to your mainframe documentation for details on the code page options.
Cisco MDS switches support international-5, france, brazil, germany, italy, japan,
spain-latinamerica, uk, and us-canada (default) EBCDIC format options.
To Next Page
Loading...
Need help?
General
