Send documentation comments to mdsfeedback-doc@cisco.com
23-24
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 23 Configuring PortChannels
Verifying the PortChannel Configuration
Figure 23-16 Switch Protocols
Step 2
Check the Persist check box for each channel that you want to convert to a manually configured channel
group.
Step 3 Click the Apply Changes icon to save any modifications.
Verifying the PortChannel Configuration
You can use the Information pane in Fabric Manager to verify your PortChannel Configuration (see
Figure 23-17).
Figure 23-17 PortChannel Summary in Fabric Manager
To Next Page
Loading...
Need help?
General
