Send documentation comments to mdsfeedback-doc@cisco.com
39-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 39 Configuring Users and Common Roles
Role-Based Authorization
Note In this case, exec CLI commands refer to all commands in the EXEC mode that do not fall in the show,
debug, and clear CLI command categories.
Modifying Rules
To modify the rules for an existing role using Device Manager, follow these steps:
Step 1 Click Security > Roles.
Step 2 You see the Common Roles dialog box shown in Figure 39-3.
Figure 39-3 Common Roles Dialog Box in Device Manager
Step 3 Click the role for which you want to edit the rules.
Step 4 Click Rules to view the rules for the role.
To Next Page
Loading...
Need help?
General
