Send documentation comments to mdsfeedback-doc@cisco.com
39-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 39 Configuring Users and Common Roles
User Accounts
Caution Cisco MDS SAN-OS does not support all numeric user names, whether created with TACACS+ or
RADIUS, or created locally. Local users with all numeric names cannot be created. If an all numeric user
name exists on an AAA server and is entered during login, the user is not logged in.
Configuring Users
To configure a new user or to modify the profile of an existing user using Fabric Manager, follow these
steps:
Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click
the Users tab in the Information pane to see a list of users like the one in
Figure 39-7.
Figure 39-7 Users listed under the Users Tab
Step 2 Click Create Row.
To Next Page
Loading...
Need help?
General
