Send documentation comments to mdsfeedback-doc@cisco.com
61-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 61 Configuring System Message Logging
System Message Logging Configuration
Table 61-2 describes the severity levels supported by the system message logs.
Note Refer to the Cisco MDS 9000 Family System Messages Reference for details on the error log message
format.
System Message Logging Configuration
System logging messages are sent to the console based on the default (or configured) logging facility
and severity values.
This sections includes the following topics:
• Message Logging Initiation, page 61-3
• Console Severity Level, page 61-4
• Module Logging, page 61-5
• Log Files, page 61-6
• System Message Logging Servers, page 61-7
• Verifying Syslog Servers from Fabric Manager Web Server, page 61-10
• Viewing Logs from Fabric Manager Web Server, page 61-11
Message Logging Initiation
You can disable logging to the console or enable logging to a given Telnet or SSH session.
wwn WWN manager Cisco MDS 9000 Family specific
xbar Xbar system messages Cisco MDS 9000 Family specific
zone Zone server Cisco MDS 9000 Family specific
Table 61-1 Internal Logging Facilities (continued)
Facility Keyword Description Standard or Cisco MDS Specific
Table 61-2 Error Message Severity Levels
Level Keyword Level Description System Message Definition
emergencies 0 System unusable LOG_EMERG
alerts 1 Immediate action needed LOG_ALERT
critical 2 Critical conditions LOG_CRIT
errors 3 Error conditions LOG_ERR
warnings 4 Warning conditions LOG_WARNING
notifications 5 Normal but significant condition LOG_NOTICE
informational 6 Informational messages only LOG_INFO
debugging 7 Debugging messages LOG_DEBUG
To Next Page
Loading...
