Send documentation comments to mdsfeedback-doc@cisco.com
7-15
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 7 Fabric Manager Web Client
Performance
Note Click a pie chart (Hosts, Storage, or ISLs) to go to the appropriate performance table.
Note License compliance information is provided at the top of the pane indicating that unlicensed switches
may not be supported in the future. You can click the link to view the list of unlicensed switches.
Note To view performance information, you must activate performance collector. To configure Performance
Manager, follow the instructions described in the “Creating Performance Collections” section on
page 7-56
Performance Detail Summary Report
To view a detailed summary report of the performance details using Fabric Manager Web Client, follow
these steps:
Step 1 Click the Performance tab, and then click Summary tab.
Step 2 Click the Performance Utilization Summary Details link at the bottom of the page.
You will see the summary report details as shown in Figure 7-8.
Figure 7-8 Performance Utilization Detail Summary Report
To Next Page
Loading...
Need help?
General
