Send documentation comments to mdsfeedback-doc@cisco.com
46-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 46 Configuring Port Security
Auto-learning
Displaying Activated Port Security Settings
To display active port security settings using Fabric Manager, follow these steps:
Step 1 Expand a VSAN and select Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane.
Step 2 Click the Active Database tab.
You see the active port security settings for that VSAN.
Displaying Port Security Statistics
To display port security statistics using Fabric Manager, follow these steps:
Step 1 Expand a VSAN and select Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane.
Step 2 Click the Statistics tab.
You see the port security statistics for that VSAN.
Displaying Port Security Violations
Port violations are invalid login attempts (for example, login requests from unauthorized Fibre Channel
devices). You can display a list of these attempts on a per-VSAN basis, using Fabric Manager.
To display port security violations, follow these steps:
Step 1 Expand a VSAN and select Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane.
Step 2 Click the Violations tab. You see the port security violations for that VSAN.
Auto-learning
This section contains the following topics:
• About Enabling Auto-learning, page 46-13
• Enabling Auto-learning, page 46-13
• Disabling Auto-learning, page 46-13
• Auto-Learning Device Authorization, page 46-14
• Authorization Scenarios, page 46-14
To Next Page
Loading...
Need help?
General
